| Vacuum Presses |
School
Furniture |
Kitchen |
Office
Furniture |
Corporate |
Customer
Service |
 |
 |
 |
MK-1A Vacuum press for 3D-foils
Easy to use
Long-lasting
Optimal pressing results
Ideal for individual and commissioned production
Comparatively low investment costs
Parts of machine:
Manufactory instructions:
1. Put the glue on the wood element
2. Put this elements in the bath
3. Cover up this elements with a foil
4. Fix the bath
5. Press the button on the control board to pull in the bath
6. Press the button for temperature control and after 90 sec the operation
will be completed
7. Pull out the bath and take the elements
Description:
1.
Main metal construction is made of the best sheet metal and pipe.
2. Heating part is made
of 18 heating elements that are controlled automatically. Power of each
heating element is 1 kW.
3.
Removable bath is controlled automatically. It is done by engine which
power is 0.5 kW.
4. Control console consists
of the control board with following instructions
Engine start
On/Off heating element
Thermo regulation
Timer
Bath moving control
Display
5. Vacuum pump has force of
25'' Hg with power of 5 kW and barrel compression of 200 l.
The price of this machine is 20.000 EUR
Our machine works with following type of foils: PVC Rigid (RTF), Polypropylene (PP), Polyolefin (PO), PVC Flexible, KYDEX,and Polystyrene.
Total time for one cycle is 90-120 sec.
MK-1S is designed for two men operation.
Machine can work in two modes: Manual and Automatic mode.
One year guarantee on the equipment.
Temperature
Bath ideal temperature 75°C
Ideal temperature on foil
103°C – 110°C
Maximum pressing temperature
160 °C
Maximum allowed pressure 4 kg/cm2
Ideal pressure 2 - 3 kg/cm2
Ideal thickness of working elements
3-22 mm
Outside
dimensions of machine:
Length 6200 mm
Width 1620 mm
Height 1500 mm
Bath dimensions 3000 x 1400 mm
Effective bath dimension
2920 x 1320 mm
Bath height 65 mm
Electrical supply
380 V, 50 Hz
Total power 23.5 kW
Heating part 18 kW
Vacuum pump 5 kW
Engine 0.5 kW
2. Put the working pieces (with glue) on the working surface
3. Spread 3D-foil over them
4. Press the foil with frame
5. Pull in the bath
6. Start pressing program
7. Pull out the bath
8. Take finished pieces out of the press
9. Repeat, starting with Step 2
