METALOKOZMETIKA
| Vacuum Presses |
School
Furniture |
Kitchen |
Office
Furniture |
Corporate |
Customer
Service |
 |
 |
 |
a
a
1.
Heat up the machine to working temperature
2. Put the working pieces (with glue) on the working surface
3. Spread 3D-foil over them
4. Press the foil with frame
5. Pull in the bath
6. Start pressing program
7. Pull out the bath
8. Take finished pieces out of the press
9. Repeat, starting with Step 2
2. Put the working pieces (with glue) on the working surface
3. Spread 3D-foil over them
4. Press the foil with frame
5. Pull in the bath
6. Start pressing program
7. Pull out the bath
8. Take finished pieces out of the press
9. Repeat, starting with Step 2
Manufactory instructions:
1. Put the glue on the wood element
2. Put this elements in the bath
3. Cover up this elements with a foil
4. Fix the bath
5. Press the button on the control board to pull in the bath
6. Press the button for temperature control and after 90 sec the operation
will be completed
7. Pull out the bath and take the elements
